ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 35 No. 6 June 2025
Materials Science and Engineering
- 1
- Simultaneous improvement of strength and ductility in selective laser melted low Sc content Al-Mg-Mn-Sc-Zr alloy via aging treatment
- Yong-kang CHEN, Yao-xiang GENG, Xiao WANG, Zhi-fa SHAN, Zhi-jie ZHANG, Hong-bo JU
- 2
- Microstructure, phase stability, and mechanical properties of Al-Li-Mg-Ti-M (M=Zn, Zr, V) lightweight high-entropy alloys
- Quan DONG, Meng LI, Yu-fei ZHANG, Jing ZHANG
- 3
- Statistical analysis of anomalous tension twin and twin transmission in pure Mg sheet for various grain sizes and strain rates
- Sai-jun HUANG, Ran NI, You-fu WAN, Hao ZHOU, Ying ZENG, Dong-di YIN
- 4
- Synchronous enhancement of corrosion resistance and mechanical properties of Mg-Zn-Ca alloys by grain refinement using equal channel angular pressing
- Yi-zhuo WANG, Xiao-ping LUO, Gang-xiao REN, Hong-xia WANG, Li-fei WANG, Wei-li CHENG, Hang LI, Xiao-peng LU, Kwang-seon SHIN
- 5
- Dynamic recrystallization behavior and spinning texture formation mechanism of magnesium alloy wheel hub
- Bing-chun JIANG, Hao-wei ZHAI, Qing-hang WANG, Meng LI, Tong ZHANG, Bin JIANG
- 6
- Silicide precipitation behavior of Si-containing near-β titanium alloy and its effect on grain refinement
- Peng-kun GUO, Chang-jiang ZHANG, Hong FENG, Fu-yin HAN, Hang LI, Jian-chao HAN, Fan PENG, Peng CAO
- 7
- Friction and wear performance of fluorinated Ti48Al2Nb2Cr alloy
- Ji-jian Guo, Zhe-xuan Li, Qing-qing Sun, Lian-kui Wu, Fa-he Cao
- 8
- Synthesis and interfacial characterization of Cr/CoNiCrAlTaY bilayer coating on γ-TiAl alloy for oxidation protection
- Zhen ZENG, Yong-sheng WANG, Ya-rong WANG, Bing ZHOU, Ke ZHENG, Wan-yuan GUI, Yan-li WANG, Sheng-wang YU, Jun-pin LIN
- 9
- Phase classification of high entropy alloys with composition, common physical, elemental-property descriptors and periodic table representation
- Shuai LI, Jia YANG, Shu LI, Dong-rong LIU, Ming-yu ZHANG
- 10
- Effect of gradient nanostructures induced by supersonic fine particle bombardment on microstructure and properties of Ni-W-Co-Ta medium-heavy alloy
- Yi Xiong, Miao-miao Yang, Nan Du, Yong Li, Jin-jin Tang, Kang-hao Shu, Shu-bo Wang, Feng-zhang Ren
- 11
- Tailoring microstructure, tensile properties, and creep resistance of additively manufactured Inconel 718 superalloy by post heat treatment
- Sajad GHAEMIFAR, Milad ROOSTAEI, Mohammad REZA ZAMANI, Stefan WURSTER, Hamed MIRZADEH
- 12
- Isothermal and cyclic oxidation behaviour of Ni-25Cr-10Al-0.5Y coating deposited by AIP and magnetron sputtering at 1323 K
- Chun-tang YU, Shu-tao CHEN, Xiao-yun LI, Wen-yao SUN, Min FENG, Cheng-yang JIANG, Wan-qi PU, Han-qing XIE, De-quan WU, Sheng-long ZHU, Fu-hui WANG
- 13
- Effect of sulfate-reducing bacteria on corrosion of copper and brass
- Shu-hua XU, Qin WANG, Zhuo-wei TAN, Xiao-bao ZHOU, Cong LI, Zhen-sheng WANG, Tang-qing WU
- 14
- Corrosion behavior and performance degradation of aluminum-copper cable joints with magnetic pulse crimping in salt spray environment
- Yuan-heng YAO, Shao-luo WANG, Hao JIANG, Jun-jia CUI, Guang-yao LI, Kai-dong LUO, Ling-hua XIA
- 15
- Microstructure and mechanical properties of high damping Zn-Al eutectoid alloy reinforced by in-situ formed Al2O3 and Al3Zr particles
- Jian-jun ZHANG, Dong-mei LU, Fu-xing YIN, Hui YU, Pu-guang JI, Yu-fang LI, Qing-zhou WANG
- 16
- Crystal growth kinetics of single-crystal Ni-rich layered cathodes for high-energy lithium-ion batteries
- Feng LI, Yu-hang TIAN, Lu-xia GE, Sheng-long FAN,Mao-sheng GONG, Ke FAN, Pei-yu HOU, Xian-qi WEI
- 17
- Construction and electrochemical performance of NaCrO2@Cr2O3 cathode material for sodium-ion batteries
- Mu-lan QIN, Chao HU, Guo-zhao FANG, Shu-quan LIANG, Wan-min LIU, Bin SHEN
- 18
- Core-shell Bi@ mesoporous carbon nanospheres as high rate and long life anodes for sodium ion batteries
- Wu YANG, Zhe-wei YANG, Chao-hui WANG, Hai-nan BIAN, Yue-de PAN, Gang LI, Kai-ying WANG, Jie-xi WANG
- 19
- Suppression of Ag dewetting and sinterability improvement of submicron Ag-coated Cu particles as fillers in sintering paste by surface modification with stearic acid
- Yeongjung KIM, Yong-Sung EOM, Kwang-Seong CHOI, Jong-Hyun LEE
Mining, Minerals Processing and Metallurgical Engineering
- 20
- Mechanical performance of hard red sandstone in acoustic emission integrated conventional triaxial compression tests
- Kun DU, Ming-hui LIU, Xue-feng LI, Li-chang WANG, Jian ZHOU, Tao YANG, Peng LI
- 21
- Oxidative volatilization mechanism and kinetics of stibnite at low temperature
- Jiang LIU, Chao-bo TANG, Qiang ZHU, Jian-guang YANG, Tian-xiang NAN, Xian-pan ZHANG
- 22
- Transformation behavior of calcium vanadate and manganese vanadate in CaO-V2O5-MnO2 system during calcification roasting of vanadium slag
- Jing WEN, Tao JIANG, Fei-fei LI, Tang-xia YU, Bo-jian CHEN
- 23
- Effect of CaO and P2O5 on non-isothermal crystallization of alkaline vanadium slag
- Can-can YU, Jiang DIAO, Jin-an WANG, Wen-feng TAN, Hong-yi LI, Bing XIE
- 24
- Efficient removal of impurity Bi element from scrap brass by compound-separation method
- Fei-ran JIANG, Chuan-rong JIAO, Li-juan WANG, Rui-lin WU, Yan-bin JIANG, Qian LEI, Meng WANG, Zhu XIAO, Zhou LI
- 25
- Effect of slow-release phosphate on stabilization and long-term stability of Zn and Cd in soil
- Chu-xuan LI, Shan-xin YUAN, Hai-feng LI, Yong-ping LU, Wei-chun YANG, Wen-shun KE, Lu TANG, Chong-jian TANG, William HARTLEY, Sheng-guo XUE
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9