Microstructures and interfacial quality of diffusion bonded
TC21 titanium alloy joints
TC21 titanium alloy joints
(State Key Laboratory of Advanced Welding Production Technology,
Harbin Institute of Technology, Harbin 150001, China)
Harbin Institute of Technology, Harbin 150001, China)
Abstract: Diffusion bonding of TC21 titanium alloy was carried out at temperature ranging from 780 °C to 980 °C for 5−90 min. The interfacial bonding ratio, deformation ratio, microstructures and microhardness of the diffusion bonded joints were investigated. Results show that joints with high bonding quality can be obtained when bonded at 880 °C for 15−30 min. The microhardness increases with increasing the bonding temperature, while it has a peak value (HV367) when bonding time is prolonged up to 90 min. Fully equiaxed microstructures, bi-modal microstructures and fully lamellar microstructures were observed when bonded in temperature range of 780−880 °C, at 930 °C or 980 °C, respectively. The volume fraction of α phase first increases and achieves the maximum when bonded at 880 °C for 60 min, and then descended.
Key words: TC21 titanium alloy; diffusion bonding; microstructure; interfacial quality